Hammer Mill

description

 
High capacity and low energy consumption
Advanced droplel crushing chamber design, reasonable secondary crushing structure, although compared witother models increased by 20%;
Both sides of the feed port are equipped with wear-resistant tooth plates to effectively destroy the materialcirculation and increase the impact on the material Rubbing, tearing, shearing action, improve the crushingefficiency, set the wind replenishing device at the end of the shaft, supplement the air volume of the crushingchamber, destroy the crushing circulation,
Set two kinds of hammer screen clearance, two different rotor configuration modes, suitable for aquatic feed andlivestock feed raw material grinding, respectively lift their respective efficiency
Ultra-stable and durable
The whole base is milled and processed to ensure the stability of the whole operation.The hammer is made of special alloy steel and hardened by suspended tungsten carbide surface to achievehigher strength and durability.
High precision dynamic balance detection rotor, running more smoothly, lower noise,Test machine by machine, running time > 45min, excellent stability thousand national standards, vibration speedup to 2-4mm/s (national standard 16mm/s)
Easy to operale
Shiftable operating door and linkage press screen mechanism, more convenient operation and maintenance.Equipped with safety interlock fitting. protect personal safety:According to the actual demand, various feeding devices such as screw and impeller can be selected.

Product Model	SFSP63*35	SFSP63*45	SFSP66*60	SFSP66*80
Main Power(kw)	22/30	37/45	55/75	90/110
Feeder Power(kw)	1.1	1.1	1.5	1.5
Capacity(t/h) Ø1.0mm	1-2	1.5-3	3-6	5-8
Capacity(t/h) Ø2.0mm	2-5	3-7	6-12	9-19

Similar items MORE

• 

  feedstuff drawer sievefeedstuff drawer sieve mainl... 

• 

  grain bucket elevatorTDTG Series Bucket Elevator:... 

• 

  feedstuff drawer plansifterIt is a new product develope... 

• 

  feed peeling machineMTPS series corn peeling mac... 

 

Please fill in your procurement needs and contact information