Kaifeng Aohua Machinery Co.,Ltd.

English

中文
English

product

Your Position : Home > product > Single Machine Equipment

Horizontal Carbonization Furnace

Product Description
This type of Horizontal carbonization furnace furnace is a new type of airflow carbonization furnace with a wide variety of raw materials, and wood raw materials can be directly carbonized;

We're here to help: Easy ways to get the answers you need.

Share With:

inquery

contact us

hot products

  • Maize Mill Equipment

  • Flour Mill Machine

  • Plansifter

  • Double Bins Plansifter

  • 1
  • 2
  • 3
  • 4

description

      


This type of Horizontal carbonization furnace furnace is a new type of airflow carbonization furnace with a wide variety of raw materials, and wood raw materials can be directly carbonized; Many biomass materials, such aswoos log, straw, peanut shells, coconut shells, sawdust, corn cobs, etc., can be manufactured using charcoal machines. The combustible gas generated during the carbonization process can be used as fuel for the furnace, which is more energy-efficient compared to traditional carbonization furnaces. The carbonization rate has significantly increased from 80% to 99%. This type of furnace is safe, easy to operate, energy-saving, and environmentally friendly. The charcoal prepared by carbonization furnace can be used as activated carbon and household fuel, and is widely used in production and daily life.




-Carbonization furnace is the use of horizontal manufacturing process, carbonization furnace has a three-layer structure, and the middle of light insulation materials,It is possible to keep the temperature in the furnace at all times.

-The door use packing seal, not into the air, Out of carbon than the conventional carbonization furnace is much higher.

-The reason is called green carbonization furnace because the stick in the carbonization process will produce a lot of light yellow combustible gas. These gases through the carbonization furnace with there own pipes can make combustible gas diversion to the charring furnace combustion zone to the second fire heating. More environmentally friendly and saving fuel.

-Carbonization furnace excess gas can be used to dry the sawdust or to burn the boiler.

-Carbonization furnace to end charcoal cooling time is shorter, we use the inter layer of the gap between the unit water cooling carbonization furnace natural cooling, more efficient and convenient.


 

Model

Capacity/carb

onization time

External dimensions(m)

Inner length(m)

Inner diameter(m)

Factory price(USD)

With Purifier

Purifier Price(USD)

WT300

1.2m³ / 6h

1.9*1.15*1.6

1.7

0.95

1400

 

 

NO

300

WT700

3m ³/ 7h

1.9*1.7*2.2

1.7

1.5

2600

300

WT1000

4.76m³ / 7h

2.9*1.7*2.2

2.7

1.5

4800

500

WT1600

7.65m³ / 9h

2.9*2.2*2.3

2.7

1.9

7600

500

WT2000

10.48m³/ 10h

3.9*2.2*2.3

3.7

1.9

9100

 

Yes

0

WT3100

15.86m³/ 12h

5.8*2.2*2.3

5.6

1.9

12000

0



The furnace adopts the principle of anaerobic dry distillation to remove volatile substances from biomass to achieve the purpose of carbonization of biomass. The charging and sealing furnace is to stack the biomass raw materials to be carbonized into the charging truck, push it into the carbonization furnace, seal the cover, and lock the furnace door; -250 ºC, the process time is 4-12 hours (the specific heating time is determined according to the moisture content, density, diameter and furnace size of the raw material), and the moisture in the material and the air in the liner are discharged; oxygen-free carbonization The tube begins to emit faint yellow smoke (combustible gas), that is, carbonization begins, and the recovered combustible gas enters the furnace to kindle, adjust the air intake, and keep the temperature in the inner tank at 300-500 ° C for 2.0-3.5 hours (according to the density and diameter of the carbonized material). , the carbonization depth requirements and the size of the furnace determine the specific temperature and carbonization time). When the temperature is below 50°C, open the lid and discharge the charcoal. The total heating and carbonization time in this furnace type furnace is 5.0-15.5 hours, and 1-2 furnaces can be completed in 24 hours. The exhausted flue gas is treated by the dust collector to meet the standard emission.
 


Many biomass materials, such aswoos log, straw, peanut shells, coconut shells, sawdust, corn cobs, etc., can be manufactured using charcoal machines.

1. Inner packing: Plastic film
2. Outside packing: Container/Wooden box
3. Shipping: By sea in QINGDAO port or according to your demand

Similar items MORE

Please fill in your procurement needs and contact information

*Inquiry:

*Mail :

*Tel/Whatsapp :

Name :

Company :

Country :

+8613949074923
+86-13949074923
Dianaguo@aohuascreeningmachine.com